Saturday, November 7, 2009

01/W FD Fix - LCD and FDD replacement (2009) Part2



(Above : Two capacitors on the original LCD module. It showed some leakage mark of electrolyte)


(Above : Replaced capacitors on LCD – They didn’t worked)

I was a bit disappointed by the results but did not throw away the hope because I called a few servicemen and they said the main-board usually does not go dead easily. I suspected some strange smell that I had experienced from my playstaion 1’s burst electrolytic capacitor. (See the picture below. I replaced the 100uF, 200V capacitor and it works well.)






No comments:

Post a Comment